paulga
Guru
- Joined
- May 28, 2018
- Messages
- 1,019
- Location
- United States
- Vessel Name
- DD
- Vessel Make
- Marine Trader Sundeck 40'
i was thinking something like this:
View attachment 145606
is this sleeve good for exhaust pipe insulation?
i was thinking something like this:
View attachment 145606
Thanks for the drawing!
what does the stand off pieces look like? it seems they are spacers between the shield and the wood panel on the back
on the sketch i put broken sides for stand off. you can use plain flat sheet instead and use just about anything for spacers to stand it off from the wood panel. maybe little blocks or rounds of aluminum or hard ceramic stand off spacers.
here's some aluminum ones: https://www.amazon.com/Aluminum-Len...27027&s=industrial&sr=1-4&ts_id=16413321&th=1
so the offset sides work as stand off pieces.
is a 0.8mm (22 gauge) sheet thick enough for a shield?
@Bmarler is the lagging wrapped on top of the sleeve? or directly around the exhaust pipe without a sleeve?there's a few options for exhaust sleeve.
here's a silicone option: Silicon Fire Sleeve: Espar Heater Parts, Diesel Truck Heaters - Lubrication Specialist
or this fiber one: Exhaust hose lagging (insulation) 1 meter